Shock Bump Multifunctional Tester - DP-201 |
|
|
 |
||
Product Overview
A combination the shock and bump testing equipment for a multi-functional requirement, high speed rising mechanism structure provide the shock testing more than 20 times per minute and bump testing can more than 120 times per minute. Easy operation and low power consumption can be installed and test anywhere. Good repeat testing result for accuracy testing. Specifications follow up international standards.
What is the purpose of Shock Test?
To detect the weakness & function degradation of specimen into a non-repetitive mechanical shock environment, also can be used for quality control to determine the strength of structure. The shock test also simulation the environmental of operation & transportation, when the random shock effective to the specimen. The test specimen be fixed into a fixture or shock machine table, the test waveform is half sine.
What is the purpose of Bump Test?
To detect the accumulate and specific function degrade of specimen into a repetitive mechanical shock environment, also can estimate the fatigue of specimen's whole structure when the environmental is a continuous impact. The shock test also simulation the environmental of operation & transportation, when the repeat shock effective to the specimen. The test specimen may be a non-package or package design for transportation. The test specimen be fixed into a fixture or shock machine table, the test waveform is a continuous repeat half sine. A test specification to define the acceleration peak value, duration time and testing times, the normally repeat times are 100, 1000, 4000.