THP Systems

Sensors

Accelerometers & Sensors foro High Temperature, High Sensitivity, General Purpose or Micro environments

Sensors

  1. TC124

    3°C to 121°C. Low Cost Temperature Only Sensor. Three Pin MIL Connector. For Permanent Installation
  2. TA135

    Dual Output, Temperature / Acceleration, Top Exit Connector / Cable, 500 mV/g, 10 mV/°C ±10 g, Peak Dynamic Range 0,2 […]
  3. LP302

    Loop Power Sensor, Acceleration, 4-20 mA Output, Top Exit Connector/Cable Peak and RMS Outputs Available Enables Vibrational Alarms for Process […]
  4. LP202

    Continuously Monitor & Protect Important Machinery 4-20 mA Current Proportional to Vibration Transmit Signals Over Long Distances with No Signal […]
  5. LP802

    Temperature Range: -40 to 176°F (-40 to 80°C) Connector: 2 Pin MIL-C-5015
  6. LP832

    Requires CB190 with D2Q or CB922 Series Connector (for non-integral cable versions) Non-Arcing, Non-Sparking Sensor for Class I, Division 2 […]
  7. TA184

    Dual Output Temperature / Acceleration, M8 Captive Bolt, Side Exit Connector / Cable, 100 mV/g, 10 mV/°C Standard 3 Pin […]
  8. LP204

    Continuously Monitor & Protect Important Machinery 4-20 mA Current Proportional to Vibration Transmit Signals Over Long Distances with No Signal […]