THP Systems

Test & Measurement Solutions

We offer a wide range of Test & Measurement Solutions, Services and Systems to organisations around the world.

Hazardous Areas

  1. LP802-XXX-5XC

    With 1 inch NPT conduit fitting Intrinsic safe applications with use of barrier Integral 1/4 – 18 NPT Mounting Stud […]
  2. LP822-XXX-5XC

    Class I, Division 2 / Zone 2 Loop Power Sensor, For Use In “Non-Arcing, Non-Sparking” Environments, Top Exit Connector, Velocity, […]
  3. LP922

    Class I, Division 2 / Zone 2 Loop Power Sensor, For Use In “Non-Arcing, Non-Sparking” Environments, Top Exit Connector, Acceleration, […]
  4. LP932

    Requires CB190 with D2Q or CB922 Series Connector (for non-integral cable versions) Non-Arcing, Non-Sparking Sensor for Class I, Division 2 […]
  5. LP852-XXX-5XC

    Continuous Monitoring in Hazardous Locations Velocity 4-20 mA Output for Applications in Hazardous Locations With 1 inch NPT conduit fitting […]
  6. LP832

    Requires CB190 with D2Q or CB922 Series Connector (for non-integral cable versions) Non-Arcing, Non-Sparking Sensor for Class I, Division 2 […]
  7. LP902-XXX-5XC

    Continuous Monitoring in Hazardous Locations Acceleration 4-20 mA Output for Applications in Hazardous Locations. CSA and ATEX Approvals With 1 […]
  8. LP832-XXX-5XC

    Class I, Division 2 / Zone 2 Loop Power Sensor, For Use In “Non-Arcing, Non-Sparking” Environments, Top Exit Connector, Velocity, […]